.jpg)
.jpg)
.jpg)
.jpg)
The full optic transmission transceiver is designed to solve the problems of image mosaic, color distortion, and failed transmission that often occur when traditional equipment transmits HDMI signals, especially long-distance transmission. At the same time, it is also designed for the needs of long-distance transmission of high-quality HDMI video signals in display system projects such as network flat panel displays, large-screen wall advertising displays, industrial automation control, medical equipment, security monitoring, and multimedia teaching. This transceiver consists of a multi-core MPO female- MPO female optical cable (custom lengths are available, up to 550m) connected to the input (TX) and output (RX). It’s a signal transmission system which integrates HDMI signal conversion, drive, receiving and restoring functions. Compared with the traditional HDMI transmission, especially the extender or optical transceiver used for long-distance transmission, this product has the advantages of stable transmission signal, easy installation and high cost performance.
Precautions for use：
1. When the transceiver is not working, be sure to unplug the 5V DC power plug
2. The default setting of this transceiver is HDMI 2.0 4K@60HZ resolution, which is compatible with both HDMI optical fiber jumper and traditional HDMI copper jumper. When using traditional HDMI copper jumper, please be sure to use a copper wire that conforms to the HDMI standard. At the same time, if you are using traditional HDMI copper jumpers, the total length of the single-sided HDMI cable is recommended to be within 2 m, and the total length of both sides is recommended to not exceed 4 m.
Note: If you use a non-standard HDMI copper cable, the display will not be able to display the picture. At this time, it is recommended to replace it with a qualified HDMI jumper, or use an optical HDMI AOC cable, or adjust the screen resolution parameters of the players and monitors on both sides to 1080P , and to play with 1080P screen playback.
3. Due to the wide variety of players and display devices in the market, the quality is uneven. Not every device complies with the HDMI2.0 protocol. If there are some cases where the screen cannot be displayed, please confirm that the player or the monitor itself and the resolution settings are normal. In the case of, first consider turning off the power of the RX end of the output of the transceiver, then turning on the power and restarting, and observe whether it is normal. If the situation persists, please replace the HDMI jumper with a qualified HDMI jumper. If the above problem still cannot be solved, Please contact our company's technical department to resolve
4.Our company can provide high-quality multi-core optical cables that match this transceiver. If the customer chooses the optical cable by himself, please select the OM3 multi-mode optical fiber jumper connected.
